Hey y'all! Filmed this aftershow several days after we wrapped up the geode soaps and had already started our next video, so it's also a preview of our next project ;) In this aftershow we cover:
-things we would have done differently
-sneak peek of next week's project
-how the soaps have held up
-what happened to the extra sugar scrub (fail!)
Hope y'all have a great ...
2019-08-02 16:05:54 +0000 UTC View Post
I think our soaps turned out pretty darn good! The sugar scrub really does kinda look like crystals, especially in Evan's purple ones where he formed a larger hole in the crystal. Plus we got to use one of our marble resin trays for display :D
After this video we'll take a break from soap for a ...
2019-07-31 15:29:11 +0000 UTC View Post
The first REAL soap we had to make was of course GEODE soap! Thought a sugar scrub embedded in the center was fitting - Evan
Yes, even after 40+ minutes of soap making, we have more thoughts!
- How the soaps have held up
- More thoughts on the melt and pour technique
- Soap vs Resin musings
- More soap experiments we want to try
- Our favorite soaps
- Plans for the soaps we made
- Our failed "YouTuber" moment/experiment/test
- Another filming fail that set us back
- T...
DON'T LEAVE SOAPS IN A HOT/HUMID GARAGE! They do this funky thing where the glycerin in the soap causes it to "sweat" and it forms these gel-like beads on the outside. Luckily, we could just wipe them off and they're fine.
Now that we know, we've cleaned them up and packaged them with shrink wrap... and they look even more like candy:
2019-07-25 19:10:32 +0000 UTC
View Post
... I know there are only 35 in the picture... but the last two didn't fit π
So happy with the variety we were able to come up with! Also so happy with this picture it's our backgrounds now lol. Excited to share the video soon!
2019-07-23 01:44:33 +0000 UTC View Post
Phew, it feels SO good to have a little breathing room in our schedule to tackle some of the things that have been bothering us for so long. Our main tripod camera (GH5) now has unlimited battery life, a remote to start and stop recording, and MUCH improved audio (hopefully).
Turns out we just had to boost the signal strength from the lav mic receiver and turn it down on the camera ...
2019-07-21 13:59:49 +0000 UTC View Post
It's so bootyful. Each one of these is a little different, some have hidden layers, and the one on the upper right has some... unexpected ingredients ;P
We've said this probably 20 times to each other but soap making feels a lot like resin. You have cool mixins, you pour it into cool molds, ever...
2019-07-19 19:44:00 +0000 UTC View Post
This intro looks so similar to a resin intro... yet also so different π
Excited to share this one with y'all! We got some new cameras and everything looks so beautiful!
-Evan
2019-07-16 23:49:07 +0000 UTC View Post
We've been getting a lot of requests in the comments to try soap making. We started watching soap making videos and holy crap, it's like resin-adjacent! There are chemicals, pigments, interesting molds, mix-ins, time limits before the whole thing starts kicking... I'm super excited. Our first video will probably be more of an experimentation/learning video, kinda like our first resin video was ...
2019-07-14 14:28:28 +0000 UTC View Post
Oh man, can't believe we waited so long to try a resin ocean, but also WHEW this was a doozy of a project logistically haha. In this aftershow...
-Crazy rush
-Twisty board... EVERYTHING was unlevel haha
-Stuff we haven't actually finished
-Working with a big brand
-Easier than geode??
-Story of getting the slab
Thanks as always for the support y'all. Seriously couldn'...
2019-07-12 17:45:43 +0000 UTC View Post
Ahhh! We did it! It's been a crazy couple days (this project had to be super rushed to finish in time, and resin only dries so fast haha).
Been wanting to try to beach/ocean resin we see all over Instagram and Pinterest (if you wanna see a bunch of super awesome work, check out @crocreekdesigns on IG). Really happy with how it turned out!
2019-07-10 16:05:24 +0000 UTC
View Post
Doing a beach-themed epoxy pour over that live edge cypress in the background. But first, on some test pieces of course because we don't trust ourselves! Also we won't be doing the whole piece of cypress, just enough for one of those bathtub trays/caddies that goes across your tub. So I guess if we ruin it we'll get another shot, but still, we feel a lot better if we practice on some cheap pine...
2019-07-07 20:18:13 +0000 UTC View Post
Check out this aftershow for
- Almost did a 3rd pour because we're perfectionists
- Huge audio mistake!
- How Evan modified the pressure pot
- Why small projects are enjoyable
- Things we could do with these sphere molds
Hey guys! Here's a sneak peek of what we made for Friday's video... we *attempted* resin planets!
They came out cool but maybe only somewhat planet-esque haha. Doesn't matter too much though, it was fun :)
Plus it was the first video we shot in the new and improved shop! (doesn't it look n...
2019-07-03 23:14:04 +0000 UTC View Post
We got a pressure pot to remove bubbles.... the first resin creation is currently in there since last night and we haven't taken it out to look yet, so we'll see if it worked haha!
We have these spherical molds meant for fancy ice cubes and we're attempting resin planets. Evan is doing Earth (or an "Earth-like" planet... haha)
2019-06-30 15:17:52 +0000 UTC
View Post
Woooooo this was a bigger than expected project y'all so lot's to cover! We talk about:
- What took the longest
- What still needs to be done
- Garage door almost-disaster
- Upcoming projects related to this
- More thoughts on the layout design changes
Hope y'all have an awesome weekend!
<3 Katelyn
What do y'all think? It's a big difference from the before:
We'll admit, there are still a handful of things to put away that we didn't have time for because of the vacation (looking at you, all of our clamps) but it's 95% done and that's good enough for the video! Really excited to publish this...
2019-06-27 20:17:32 +0000 UTC View PostText post only right now because we're in the air on a plane and the wifi connection is just garbage :P
Just wanted to say thanks to all of you because your constant support means so much to us and makes going on vacations that much easier.
Really going to try and keep work stuff to a minimum and only do the things we feel like doing so we can come back recharged and ready to ...
2019-06-22 18:15:25 +0000 UTC View Post
It's been a bit bumpy and took a longer than we thought but we've made a ton of progress! Yes the shelves are still empty but it already looks so much better :D
This was also not the initial configuration we had planned but we just rolled with the punches as per usual :P
We also can't believe that the video Katelyn has edited so far is 20 min already, going to be another long one lo...
2019-06-19 18:52:08 +0000 UTC View Post
...is going much slower than expected haha. It's just a lot to unpack, both figuratively and literally haha. So many things we bought for projects that didn't happen, tools we have to admit we don't use and don't need, and good lord so much wood. So. Much. Wood. Anyways, we're making progress and we've cleared a lot of space considering this used to look like this a few days ago:
2019-06-16 20:54:11 +0000 UTC
View Post
Sweaty adventure time! In this aftershow we cover:
- thoughts on falling through the ceiling
- secret pillows
- getting real about how much we enjoyed this project
- future plans for the attic
- sponsor concerns
- how long it really took only working at night
Hope y'all have a great weekend and nobody falls through the ceiling
<3 K
Yeah probably :P I mean... I wish that I had NOT fallen through our ceiling but I mean, guys, check this out! Our attic is so much more functional now.
It's one of those projects that is not necessarily the most fun in the moment but you feel really glad that you did in the end. Excited to share the video with y'all this week!
-Evan
p.s. We got official approval from Low...
2019-06-12 19:42:58 +0000 UTC View Post
So, this happened...
We were installing usable flooring in our attic as part of our next video (attic organization upgrade) and Evan fell through the ceiling. He's ok, just a little banged up, thank GOODNESS. It was pretty scary in the moment but we can laugh about it now because of the irony. W...
2019-06-09 19:14:42 +0000 UTC View Post
Somehow no one got injured, yay!!!
- our favorite type of welding
- expectations vs reality working in our favor for once
- how we think it would actually do in a zombie apocalypse
- flail spike length thoughts
- other design thoughts
- historical lesson on flails
- new filming style and finding our groove
Hope y'all are having a great weekend!
<3 Katelyn<...
2019-06-07 16:16:14 +0000 UTC View Post
Filming the final destruction scenes yesterday was SO much fun. We had a blast, everything went pretty well, much laughter and excitement, and we got some great footage.
Excited to see how it all shapes together when Katelyn edits it. Going to end up being a loooong video lol, maybe our longest.
-Evan
2019-06-04 11:27:56 +0000 UTC
View Post
Getting close y'all π
2019-06-03 22:51:04 +0000 UTC View Post
Hi everyone! So some people have asked us to setup a Discord and I finally pulled the trigger a few days ago. I also setup a bot here on Patreon and on Discord with the help of some moderators there so that any of you guys with linked accounts get access to a special chat over there as an additional reward!
That also had the exciting consequence of pulling anyone who has a Discord account...
2019-06-02 14:15:32 +0000 UTC View Post
MADE SOME AWESOME PROGRESS TODAY. Could not wait to share this photo with y'all lol
-Evan
2019-06-02 01:46:12 +0000 UTC View Post
Much better!! Now it can fit two welders and has some easy wooden attachment points for later modifications ππ
