Adorable Flexi Tiger (March Design) (Archived)
Added 2023-03-24 16:59:47 +0000 UTCUpdate - 30-03-2023
Fixed Tiger head looking at the ground
Added front feet curves (Now sit more easily)
Download
_____________________________________
Hello Everyone,
I am super happy to introduce you to our latest design, the Adorable Flexi Tiger. It's a print-in-place model and does not require any support structure. Below are some recommended settings for printing:
- Use 4 bottom layers and 8 top layers.
- I recommend a minimum of 3 wall counts.
- Ensure good bed adhesion by using a Brim or Rafts.
- Set your speed to 60mm/sec and adjust as necessary for your printer.
You will get the Below files
1. Artflex_Adorable_Flexi_Tiger.stl
2. Artflex_Adorable_Flexi_Tiger_PrePainted.3mf
I hope you will enjoy printing this design.
If you could share your printed images on social media, it would really help me grow and continue with this hobby๐. Thank you!
Happy printing!
Comments
Sent a video on IG, will upload this on Patreon page as well to demonstrate Head lock with body pattern
2023-03-28 11:19:01 +0000 UTCCan you please ping me on Instagram
2023-03-28 11:13:36 +0000 UTCI just printed one of these and it's very head heavy. Keeps looking at the ground.
R&D 3D Printing
2023-03-28 11:08:39 +0000 UTCAww we do not yet! Looking at the prusa xl but not sure yet which way to go
Laying Layers
2023-03-26 18:30:29 +0000 UTCLooking forward to see it printed, if you have X1 carbon please print it in multi material ๐
2023-03-26 17:59:23 +0000 UTCOMG so cute, if only a printer was free!!!!
Laying Layers
2023-03-25 18:28:34 +0000 UTCLatest files added with teeth
2023-03-25 13:55:06 +0000 UTCHe was looking more Adorable to me without teeths so i took the artistic call, I will add one version with teeth asap ๐ค
2023-03-25 11:54:08 +0000 UTCGlad you like him, looking forward for your print ๐ฅฐ
2023-03-25 06:53:30 +0000 UTCThe shared one doesn't have teeth?
Roberto Mello
2023-03-25 00:19:19 +0000 UTC
